Prev Page Next Page

Architecture

Formal Definition

A body associated with an entity declaration to describe the internal organization or operation of a design entity. An architecture body is used to describe the behavior, data flow, or structure of a design entity.

Simplified Syntax

architecture architecture_name of entity_name is

  architecture_declarations

begin

  concurrent_statements

end [ architecture ] [ architecture_name ];

Description

Architecture assigned to an entity describes internal relationship between input and output ports of the entity. It consists of two parts: declarations and concurrent statements.

First (declarative) part of an architecture may contain declarations of types, signals, constants, subprograms (functions and procedures), components, and groups. See respective topics for details.

Concurrent statements in the architecture body define the relationship between inputs and outputs. This relationship can be specified using different types of statements: concurrent signal assignment, process statement, component instantiation, concurrent procedure call, generate statement, concurrent assertion statement and block statement. It can be written in different styles: structural, dataflow, behavioral (functional) or mixed.

The description of a structural body is based on component instantiation and generate statements. It allows to create hierarchical projects, from simple gates to very complex components, describing entire subsystems. The connections among components are realized through ports. Example 1 illustrates this concept for a BCD decoder.

The Dataflow description is built with concurrent signal assignment statements. Each of the statements can be activated when any of its input signals changes its value. While these statements describe the behavior of the circuit, a lot of information about its structure can be extracted form the description as well. Example 2 contains this type of description for the same BCD decoder as in the previous example.

The architecture body describes only the expected functionality (behavior) of the circuit, without any direct indication as to the hardware implementation. Such description consists only of one or more processes, each of which contains sequential statements (Example 3).

The architecture body may contain statements that define both behavior and structure of the circuit at the same time. Such architecture description is called mixed (Example 4).

Examples

Example 1

architecture Structure of Decoder_bcd is
signal S: Bit_Vector(0 to 1);
component AND_Gate
  port(A,B:in Bit; D:out Bit);
end component;
component Inverter
  port(A:in Bit; B:out Bit);
end component;
begin
   Inv1:Inverter port map(A=>bcd(0), B=>S(0));
   Inv2:Inverter port map(A=>bcd(1), B=>S(1));
   A1:AND_Gate port map(A=>bcd(0), B=>bcd(1), D=>led(3));
   A2:AND_Gate port map(A=>bcd(0), B=>S(1), D=>led(2));
   A3:AND_Gate port map(A=>S(0), B=>bcd(1), D=>led(1));
   A4:AND_Gate port map(A=>S(0), B=>S(1), D=>led(0));
end Structure;

 
The components Inverter and AND_Gate are instantiated under the names Inv1, Inv2, A1, A2, A3 and A4. The connections among the components are realized by the use of signals S(0), S(1) declared in the architecture's declarative part.

Example 2

architecture Dataflow of Decoder_bcd is
begin
   led(3) <= bcd(0) and bcd(1);
   led(2) <= bcd(0) and (not bcd(1));
   led(1) <= (not bcd(0)) and bcd(1);
   led(0) <= (not bcd(0)) and (not bcd(1));
end Dataflow;

 
All the four statements here are executed concurrently and each of them is activated individually when any of its input signals changes its value.

Example 3

architecture procedural of Decoder_bcd is
signal S: bit_vector (3 downto 0);
begin
   P1: process (bcd, S)
   begin
     case bcd is
         when "00" => S <= "0001" after 5 ns;
         when "01" => S <= "0010" after 5 ns;
         when "10" => S <= "0100" after 5 ns;
         when "11" => S <= "1000" after 5 ns;
     end case;
   led <= S;
   end process;
end procedural;

 
The clause "after 5 ns" here allows to introduce time delay of the circuit. The assignment of a new value to the led signal will be done only after 5 nanoseconds of the simulated time.

Example 4

architecture Mixed of Decoder_bcd is
signal S: Bit_Vector(0 to 2);
component Inverter
   port(A: in Bit; B: out Bit);
end component;
begin
Inv1: Inverter port map (A=>bcd(0), B=>S(0));
Inv2: Inverter port map (A=>bcd(1), B=>S(1));
P: process (S, bcd)
   begin
      led(0) <= S(0) and S(1) after 5 ns;
      led(1) <= S(0) and bcd(1) after 5 ns;
      led(2) <= bcd(0) and S(1) after 5 ns;
      led(3) <= bcd(0) and bcd(1) after 5 ns;
   end process;
end Mixed;

 
Above, two Inverter component instantiation statements define the circuit responsible for determining the value of the signal S. This signal is read by behavioral part i.e. the process statement P. In this process, the values computed by the and operation are assigned to the led output port.

Important Notes

 
Prev Page Next Page